6.4 Cabinet The cabinet consists of two half-shells in enamelled sheet metal, which are secured to a Carboran base. The support cross-member (in galvanized sheet metal) is screwed to the upper section of the cabinet. The work-top is screwed to the rear section of the cabinet shell. Under-counter versions are fitted with tops in galvanized sheet metal. The cabinets are available in a range of different versions that can be installed in any part of the home (bathroom, kitchen, etc.):
ѓ 32cm ( P66 ) ѓ 42/45cm ( P61 ) ѓ 52/54cm ( P65 ) ѓ 57/60cm ( P62 , without plinth) ѓ 57/60cm ( RIM ) ѓ 57/60cm ( P63 , with plinth) ѓ 62 cm ( NEAT ) 6.4.1 Types of cabinet SOI/DT 2002-05 eb 31 599 35 23-17 Types of cabinet and dimensions in cm (HxWxD) (the height includes the 3cm top, if featured)) P61soft (85x60x45) P63soft (85x60x57) P65soft (85x60x54) NEAT (85x60x62) P61 square (85x60x42) P63soft (large door) (85x60x57) P65 square (85x60x52) P63 double door (85x60x57) P62 soft (85x60x57) P63 soft (85x60x57) P66 (85x60x32) RIM (85x60x57) P62 square (85x60x57) P63 soft (large door) (85x60x57) P66 built-in (78x60x32) P64 built-in (82x60x54)