7 WASHER-DRYER COMPONENTS 1. Tub 2. Drying condenser 3. Fan 4. Drying heater casing 5. Cold water fill solenoid 6. Drain pump 7.1 Fan assembly The fan ducts the air from the condenser to the casing containing the heating elements. The fan is actioned by a drive belt attached to the fan motor. 1. Fan 2. Motor 3. Drive belt 1. Fan cover 2. Fan duct 3. Spacer 4. Bearings 5. "Seeger" rings 6. Spindle fastening 7. Pulley 8. Fan 9. Nut 7.1.1.1 Delivery of the fan Ц standard version: 55 m 3 of air/hr Ц “High Performance” version: approximately 80m 3 of air/hr SOI/DT 2002-05 eb 55 599 35 23-17