7.3.1 Determining the drying time (models with electronic control system only) In certain models with electronic control (EWM2000/MWM), the user can select automatic drying cycles. In this case, the drying time is determined according to the desired degree of humidity. The electronic control system utilizes an NTC sensor, fitted to the drying condenser, to calculate the drying time. SOI/DT 2002-05 eb 58 599 35 23-17 Type “A” condenser 1. Drying condenser 2. NTC temperature sensor Type “B” condenser 1. Drying condenser 2. NTC temperature sensor