8.6.2 Electrical symbol 8.6.3 Checking for efficiency WATER FILL CONTINUES WHEN THE APPLIANCE IS SWITCHED OFF: - Solenoid valve jammed mechanically. Replace the solenoid valve WATER FILL CONTINUES DURING THE WASHING CYCLE: - Check the hydraulic circuit of the pressure switch and the pressure switch itself. NO WATER FILL: 1. The solenoid valve vibrates (noise from the coil) but does not introduce water: - check the hydraulic circuit that supplies the solenoid valve (tap turned off, insufficient mains water pressure, fill hose kinked or obstructed). - Solenoid valve jammed mechanically. Replace the solenoid valve 2. The solenoid valve does not vibrate:
- Check the coil winding (3500 - 4500 ohm); if faulty, replace the solenoid valve. - Solenoid valve jammed mechanically. Replace the solenoid valve - Check the hydraulic circuit of the pressure switch and the pressure switch itself - Check the timer and/or the main PCB for correct operation. SOI/DT 2002-05 eb 68 599 35 23-17