Using a specific procedure, the operator can display the total operating time for the appliance, which is counted from the moment it is first switched on. The unit can count up to a maximum of 6,550 hours of operating time. ѓ Only the operating time of normal programmes (and not diagnostic cycles) is counted. ѓ The actual operating time for the cycle is counted (which does not include pauses, delayed start time, rinse hold time and soaking phases). ѓ The precision of the counter is 30 seconds per programme. ѓ Only whole hours of operation are counted (1 hr and 59 min = 1 hr).
6 OPERATING TIME COUNTER 6.1 Reading the operating time Do not start the procedure with the combination buttons pressed Serie 7 Serie 8 A.D.L. 10 / 2010 14/26 599 73 54-08 Turn the appliance on at the ON/OFF switch Turn the selector dial clockwise until the fifth LED in the right-hand row is on. Press the START/PAUSE button and the nearest option button simultaneously (as shown in the figure). Hold down the buttons until the hours of operation appear on the display (at least 5 seconds).