BYD dolphin — Blind Spot Assist (BSA)

poses a risk of collision, it performs emergency braking automatically. the function has been activated and can trigger alarms at any time. RCW* Precautions At vehicle speeds between 5 km/h and 146 km/h, if the rear corner mmWave radar detects a risk of collision with a vehicle approaching quickly from behind on the current lane, the hazard warning light turns on to warn the driver in that vehicle against a possible collision. ● While the BSD system provides assistance in monitoring blind spots of rearview mirrors, it cannot replace the driver's observation and judgment. The driver must keep control of vehicle at all times and drive properly and is fully responsible for the vehicle.

DOW is realized with rear corner mmWave radars installed on both sides of the rear bumper. When the vehicle is stationary with doors unlocked, the system keeps indicators on side mirrors solid on to warn the driver if moving objects, such as bicycles or automobiles, on an adjacent lane are approaching from behind. At the same time, an icon is displayed on the instrument cluster. If the driver attempts to open the door at this time, indicators on side mirrors begin to flash and a chime sounds. DOW* ● The BSD system may be unable to provide adequate warning on target vehicles approaching from behind at a high speed.

04 ● The driver must ensure the normal operation of the BSD system, keeping its rear corner mmWave radars in good condition. For example, dirt, snow, or other obstructions need to be cleared right away. USING AND DRIVING ● The BSD system gives a warning if unrelated targets at the rear side or in the rear (such as work zone barriers, large roadside billboards, reflectors in tunnels, or other objects with a large radar cross section) are mistakenly selected as target vehicles. Function Button Operation ● Enable or disable BSD, RCTA, RCTB, RCW, or DOW in → ADAS → Active Safety → Blind Spot Assist . ● Detection may be affected or delayed in some environments.

If the radar cross section of the target vehicle is too small (a bicycle, electric moped or pedestrian, for example), the system may fail to identify targets, leading to false alarms. In addition, detection may also be affected or delayed by noise or electromagnetic interference. ● When the blind spot assist system is disabled, no relevant indicators are displayed on the instrument cluster. ● When the blind spot assist system is standing by, if vehicle conditions, such as speed or gear status, do not meet the requirements of any function, cluster and blind spot assist will not be activated.

is displayed on the instrument System Limitations ● Under some circumstances, it is difficult for the system to assist the driver, and detection may be affected or delayed. Possible circumstances include, but are not limited to: ● If the blind spot assist system malfunctions, is displayed. ● When the blind spot assist system is active, is displayed, meaning that 115