contacting the neck or falling from the shoulder. Position the lap belt as low as possible around the hip. 4. Unlock the seat belt. ● Press the red unlock button on the buckle. The latch plate pops out, and the seat belt automatically retracts. If the seat belt does not retract smoothly and automatically, pull it out and check whether it is twisted. 01 SAFETY CAUTION ● The shoulder belt should cross the center of the shoulder. The seat belt should be far from the neck and not liable to slip from the shoulder; otherwise, it cannot function well in the event of emergency braking or accident and may even cause severe injury.
REMINDER ● For normal functioning of the rear seat belt, ensure that its latch is inserted into the corresponding buckle during use. The driver should remind occupants to wear seat belts properly. ● The lap belt should be positioned as low as possible across the hip to prevent any injury caused by pressing against the abdomen in case of an accident. ● The driver should ensure that all occupants are wearing seat belts before driving the vehicle. ● The seat belt should be fitted tight to the body for better protection. 3. Insert the latch into the buckle until it clicks, and then pull it back to make sure it is firmly locked. Do not fasten the belt with any part of the strap twisted.
CAUTION ● One seat belt is for one occupant only. Do not allow multiple occupants (including children) to share one seat belt. ● Avoid traveling with the seatback leaning too far back. The seat belt protection performs best when the seatback is upright. ● Make sure that no seat belt or its spring bolt/buckle becomes pressed by the door; otherwise, the seat belt may be damaged. 13