REMINDER ● Rolling down: Press the switch to the first notch and do not release. The corresponding window is rolled down manually. of detergent, may damage the washer motor. ● If the trunk is open or not fully closed, the wiper switch will fail to control the rear wiper until the lid is closed. ● Rolling up: Pull the switch to the first notch and do not release. The corresponding window is rolled up manually. Delay function Driver's Door Switches ● After the vehicle is powered off, if the front doors are not open, the four window switches has a 10-minute roll-up/down delay period. During this period, the windows can still be rolled up and down.
If either of the front doors is opened during this period, the delay function is canceled, and the switches can no longer be used to operate the windows. Power Window Switches 03 CONTROLLER OPERATION ● The window control switch at the driver's side contains four buttons to roll up or down windows on four doors, respectively. ● Press a switch to roll the window down. ● Pull a switch to roll the window up. WARNING ● Before closing a power window, ensure occupants' hands are not placed upon the window glass; pinching of hands or fingers can result in serious injuries.
Anti-pinch function* The anti-pinch function automatically stops the window glass from closing and withdraws it a certain distance, if an obstruction is sensed while the window is closing. Automatic operation ● Rolling down: Press a switch to the second notch and release. The corresponding window rolls down automatically. Initialization of anti-pinch function* ● If the low-voltage battery is disconnected while a window is being rolled up or down, the automatic rolling-up and anti-pinch functions both cease to work. In this case, initialize the settings as follows: ● Rolling up: Pull a switch to the second notch and release. The corresponding window rolls up automatically.
● To stop the window halfway, gently push the switch in the opposite direction. ● Pull up and hold the window switch so that the window glass reaches the top position and stalls there for 0.5 seconds. Manual operation 63