Using DC Charging Piles ● Charging ends automatically when early stop time is due or the charging is complete. 1. Equipment ● Charge the vehicle using a DC charging pile in a public place, which is typically installed at a specific charging station. ● Unplug the charging connector: ● Remove the charging connector. ● Charging time: Refer to the charging time message on the instrument cluster. ● Press the unlock button twice within three seconds or press the microswitch on the door handle to stop charging. ● Equipment specifications: Please check the instructions for the charger.
● When the DC charging pile charging is complete, organize the charging equipment and store the charging connector in its designated position properly. 2. Charging DC charging is achieved by connecting the vehicle to a DC charger via its connector. ● Reinsert the DC charge port cap and close the port door. ● Unlock the charge port door, then open the port door and cap. ● Connect the vehicle port: REMINDER ● Plug the charging connector into the port and lock it. ● Do not close the charge port door when the port cap is fully open. ● Operate the charging equipment to start charging. CAUTION ● If the charging connector cannot be removed after unlocking, try a few more unlocking attempts.
If that does not work, try emergency unlocking. For the operating procedure, see "Emergency Unlocking of the Charge Port" in "Charge Port Anti- theft Lock". ● To unlock the charge port after DC charging, press the unlock button twice within three seconds for the operation to be successful. ● The charging connection indicator lights up on the instrument cluster. ● In the charging process, the instrument cluster displays relevant charging parameters and the charging sign. ● See the charging instructions for specific charging precautions. 3. Stopping charging ● End the charging: 78