BYD dolphin — EPB Switch

● "N": Neutral, used for temporary stop. Under all circumstances, always shift to "P" before getting out ("Parking"). WARNING avoid accidents due to insufficient braking force. ● When the motor is running and the vehicle is in the "R"/"D" gear, always stop the vehicle by stepping on the brake pedal, as there is still force transmitted from the actuator and the vehicle can travel slowly even in its idle condition. ● "D": Drive. Shift to "D" to drive the vehicle normally. ● If you want to shift a gear while driving forward, do not step on the accelerator pedal to prevent accidents. ● "P": Parking. Press this button to park the vehicle.

The transmission should be set to this position when the vehicle is being shut down or started up. By pressing the brake pedal to start the vehicle, you can shift from Park to another position. ● Never shift to "R" or press the "P" button while the vehicle is moving, in order to prevent accidents. ● Never coast downhill in "N", especially if the motor is not running. ● To prevent unintended vehicle movement, pull up the brake and press the "P" button once the vehicle has stopped completely. Electronic Parking Brake (EPB) CAUTION EPB Switch ● To prevent damaging the transmission, press the "P" button only after the vehicle has completely stopped.

Be sure to engage the EPB every time before parking and leaving the vehicle. WARNING ● If the motor is shut down, do not allow the vehicle to move after it has been shifted to "N", to 94