CAUTION WARNING vehicle is not in "P" gear (parking gear). is driven under severe weather conditions. Be careful to avoid any possible accident. Automatic EPB Release upon Vehicle Start If EPB Release Fails ● With the vehicle parked, start the vehicle, press and hold the brake pedal, and shift from "P" or "N" into a driving gear such as "D" or "R". EPB is released automatically, the indicator goes off, and the "EPB released" message is displayed. ● If manual EPB release fails, press and hold the EPB switch for over two seconds. If EPB can be released, drive the vehicle to the nearest repair shop to check the brake pedal switching signal and relevant parts and lines.
If it cannot be released, contact a BYD authorized dealer or service provider immediately. CAUTION ● Be sure to always press and hold the brake pedal when shifting gears. Release the pedal only after the intended gear is displayed on the instrument cluster. Emergency Braking When Brake Pedal Fails ● When the vehicle is in motion and ESC system is functional, controlled deceleration for parking brake (CDP) can be used if the brake is stuck or fails. If only EPB is engaged, the braking deceleration is 0.4 g; if EPB is engaged and the brake pedal is pressed, the braking deceleration is 0.8 g.
Avoid using EPB for forced braking, but only activate emergency braking in case of emergencies such as brake pedal failure or sticking. ● When the vehicle has been started and the gear is in a driving gear such as "D" or "R", engage EPB manually, then simply press the accelerator pedal slowly to a certain degree. EPB is released automatically and turns off with the message "EPB released" displayed. WARNING ● For safety considerations, refrain from using EPB for braking in normal driving. It is preferred to be used when the brake pedal fails or is blocked. EPB System Indicator ● When the vehicle is powered on, if the EPB is engaged, is solid on on the instrument cluster.
● As the EPB cannot go beyond the physical limit of road adhesion, activating the emergency brake function may result in vehicle drift, sideslip, or deflection when the vehicle passes through bends or dangerous/heavy-traffic road sections, or when the vehicle ● When the vehicle is powered off, if the EPB is engaged, comes on and then turns off in about three seconds. ● When the vehicle is powered on, the EPB system starts self-check. turns on and then turns off in about three seconds. If it does not, the EPB or braking system may be faulty. In this 96