User Manual EM303B General Purpose Inverter When setting skip frequency setting is enabled, if setting frequency is within skip frequency range, and when frequency setting rises, the output frequency will rise to= Skip frequency + Skip frequency range. When frequency setting drops, the output frequency will drop to= Skip frequency - Skip frequency range.In the process of acceleration / deceleration, the output frequency jumps across the skip frequency range smoothly as shown in Figure 7-20.
8.8.5 Wobbulation Skip Frequency Command Frequency Dropping Skip Frequency Skip Frequency 3 F6-20 Range 3 F6-21 Skip Frequency Range 2 Skip Frequency 2 F6-18 F6-19 Frequency Rising Skip Frequency 1 F6-16 Skip Frequency Range 1 F6-17 Output Frequency Figure 7-20 Skip Frequency 126 No. Function Range Unit Default Type Wobbulation Operation Mode Ones place: Wobbulation operation control 0: Auto-operation 1: Terminal Control Tens place: Wobbulation input mode 0:Wobbulation operation started after reached the mid-point 1:
Start wobbulation operation when its preset time is up 00 〇 F6-24 Preset Frequency of Wobbulation 0.00～Fmax/0.0～Fmax Hz 0.00 ● F6-25 Preset Wobbulation Time 0.00～600.00 S 15.00 ● F6-26 Upper Limit Frequency of Wobbulation Lower Limit Frequency of Wobbulation～Fmax Hz 40.00 ● F6-27 Lower Limit Frequency of Wobbulation 0.00/0.0～Upper Limit Frequency of Wobbulation Hz 20.00 ● F6-28 F6-29 Jump Frequency of 0.00/0.0～(Upper Limit Frequency Hz 5.00 ●