User Manual EM303B General Purpose Inverter F9-02 ones place=0 After numeric reference input changed, it can only be saved by pressing DATA ENTER . F9-02 ones place=1 After the setting value of primacy numeric frequency (F0-07) changed, it will be saved automaticallywithoutpressing DATA ENTER . F9-02 thousands place=0 Edit the numeric reference input slowly at first, and then fast later based on the effective lasting time of terminal UP/DOWN. F9-02 thousands place=1 Edit the numeric reference input as per the setting UP/DOWN rate set by F9-07 based on the effective lasting time of terminal UP/DOWN, it will be calculated by second, and only round-up no round-off. F9-07 UP/DOWN frequency rate:
Set the acceleration/deceleration rate of terminal UP/DOWN frequency. Remarks: UP/DOWN function is only applied in stepping mode. UP/DOWN frequency rate of keypad is a fixed rate. It is only for F0-07. Speed Setting 8.11.3 Speed Setting Mode F9-03 ones place is for selecting integrated speed input mode. F9-03 ones place =0 The integrated speed is only set by primary speed setting mode, and auxiliary speed setting mode is disabled. F9-03 ones place =1 The integrated speed is only set by auxiliary speed setting mode, and primary speed setting mode is disabled.
F9-03 ones place =2 Select integrated speed input mode =the auxiliary speed setting (Please pay attention to that the value is positive or negative) + primary speed setting. 138 No. Function Range Unit Default Type Speed Setting Mode Ones place: Integrated speed input mode 0: Primary speed setting mode 1: Auxiliary speed setting mode 2:Primary speed setting + auxiliary speed setting Tens place: Speed setting mode under jog control 0: Jog numeric speed setting mode 1: Jog numeric speed setting mode + primary speed setting mode 2: Jog numeric speed setting mode + auxiliary speed setting mode Hundreds place: Relation between auxiliary speed and primary speed 0:
Primary speed + auxiliary speed 1: Primary speed - auxiliary speed 000 〇 F9-03