EM500 Open-Loop Vector Control Inverter User Manual 114 Parameter 22 F11.22 User-Defined Parameter 23 U05.04 ● F11.23 User-Defined Parameter 24 U08.00 ● F11.24 User-Defined Parameter 25 U19.00 ● F11.25 User-Defined Parameter 26 U19.01 ● F11.26 User-Defined Parameter 27 U19.02 ● F11.27 User-Defined Parameter 28 U19.03 ● F11.28 User-Defined Parameter 29 U19.04 ● F11.29 User-Defined Parameter 30 U19.05 ● F11.30 User-Defined Parameter 31 U19.06 ● F11.31 User-Defined Parameter 32 U19.12 ● F12 Keypad and Display Function Group F12.00 M.K 0: No Function 1: Forward JOG 2: Reverse JOG 3: Forward/Reverse Switch 4: Rapid Stop 5: Coast to Stop 6: Cursor Left Shift 1 〇 F12.01 STOP 0:
Valid Only at Keypad Control 1: Valid at All Command Channels 1 〇 F12.02 Parameter Locking 0: Unlocked 1: Reference Input, Unlocked 2: All Locked Except this Function Code 0 ● F12.03 Parameter Copy 0: No Autotuning 1: Upload Parameter to Keypad 2: Download Parameter to Inverter 0 〇 F12.04 LED Display Parameter 1 00000000 - 11111111 (o for non-displaying, 1 for displaying) bit0: Output Frequency 000 11111 ●