EM500 Open-Loop Vector Control Inverter User Manual 127 Frequency between Deceleration Time 1 and Deceleration Time 2 F15.13 Acceleration/Decele ration Time Unit 0: 0.01s 1: 0.1s 2:1s 0 〇 F15.14 Hopping Frequency Point 1 0.00 - 600.00 Hz 600.00 ● F15.15 Frequency Hopping Range 1 0.00 - 20.00, 0.00: Disabled Hz 0.00 ● F15.16 Hopping Frequency Point 2 0.00 - 600.00 Hz 600.00 ● F15.17 Frequency Hopping Range 2 0.00 - 20.00, 0.00: Disabled Hz 0.00 ● F15.18 Hopping Frequency Point 3 0.00 - 600.00 Hz 600.00 ● F15.19 Frequency Hopping Range 3 0.00 - 20.00, 0.00:
Disabled Hz 0.00 ● F15.20 FAR Detection Bandwidth 0.00 - 50.00 Hz 2.50 〇 F15.21 Output Frequency Detection Range FDT1 0.00 - Maximum Frequency F00.16 Hz 30.00 〇 F15.22 FDT1 Hysteresis -(Fmax-F15.21)～F15.21 Hz 2.00 〇 F15.23 Output Frequency Detection Range FDT2 0.00 - Maximum Frequency F00.16 Hz 20.00 〇 F15.24 FDT2 Hysteresis -(Fmax-F15.23)～F15.23 Hz 2.00 〇 F15.25 Analog input Level Detection ADT 0: AI1 1: AI2 2: AI3 3: AI4 (Expansion Card) 0 ○ F15.26 ADT1Analog input Level Detection ADT1 0.00 - 100.00 % 20.00 ● F15.27 ADT1 Hysteresis 0.00 - F15.26 (Monotonic Downward is active) % 5.00 ● F15.28 Analog Input Level Detection ADT2 0.00 - 100.00 % 50.00 ●