EM500 Open-Loop Vector Control Inverter User Manual 133 F18.01 Set Frequency 0.00 - Maximum Frequency F00.16 Hz xxx × F18.02 Not Used F18.03 Estimated Feedback Frequency 0.00 - Upper Limit Frequency Hz xxx × F18.04 Output Torque -200.0 - 200.0 % xxx × F18.05 Torque Setting -200.0 - 200.0 % xxx × F18.06 Output Current 0.00 - 650.00 (Motor Rated Power ≤ 75kW) 0.0 - 6500.0 (Motor Rated Power >75kW) A xxx × F18.07 Output Current Percentage 0.0 - 300.0 (100.0= Inverter Rated Current) % 0.0 × F18.08 Output Voltage 0.0 - 690.0 V xxx × F18.09 DC bus Voltage 0 - 1200 V xxx × F18.10 Simple PLC Running Times 0 - 10000 xxx × F18.11 Simple PLC Running Stage 1 - 15 xxx × F18.12 PLC Running Time of Present Stage 0.0 - 6000.0 xxx × F18.13 Not Used F18.14 Load Speed 0 - 65535 rpm xxx × F18.15 UP/DOWN Offset Frequency 0.00 - 2*Maximum Frequency F00.16 Hz xxx × F18.16 PID Setting 0.0 – PID Maximum Range xxx × F18.17 PID Feedback 0.0 – PID Maximum Range xxx × F18.18 Kilowatt-Hour Meter, MWh 0 - 65535 MW h xxx × F18.19 Kilowatt-Hour Meter, KWh 0.0 - 999.9 kWh xxx × F18.20 Output Power 0.00 - 650.00 kW xxx × F18.21 Output Power Factor -1.000 - 1.000 xxx × F18.22 Numeric Input Terminal Status 1 X5 X4 X3 X2 X1 xxx × 0/1 0/1 0/1 0/1 0/1 F18.23 Numeric Input AI3 AI2 AI1 X7 X6 xxx ×