EM500 Open-Loop Vector Control Inverter User Manual limit (upper limit frequency limit, maximum frequency limit, direction limit and frequency hopping limit). The setting descriptions are given in Figure 1-2 to Figure 1-4. 第n段速 F08.00～F08.14 Preset speed n F08.00 – F08.14 UP/DOWN setting UP/DOWN给定 n=1,2,…,15 0：数字频率给定F00.07 0: Numeric frequency setting 1：AI1*F00.16 1: AI1 * F00.16 F00.07 + Preset speed terminal 多段速端子 主频率切换 Main frequency 0 1 2 3 4 5 2：AI2*F00.16 2: AI2 * F00.16 + Main frequency source gain 主 频率源 DI:14～11 0 DI: 14 - 11 DI:51～56 switching DI: 51 – 56 Disabled 无 Main frequency source A F00.04 3：AI3*F00.16 3:
AI3 * F00.16 + + 增益 F00.10 F00.10 有效 Enabled AI1 AI2 AI3 HDI(脉冲) F00.07 6 4：AI4*F00.16 5：HDI*F00.16 5: HDI * F00.16 4: AI4 * F00.16 HDI (pulse) 6：SCI*F00.16 6: SCI * F00.16 Communication 通讯 As indicated in Figure 1-2, when setting main frequency source A, user needs to Figure 1-2 Main Frequency Source A Setting consider settings and status of numeric terminals comprehensively. According to terminal settings, inverter can run at a preset speed or at a speed determined through numeric setting, analog input, pulse or communication. channel and is in arithmetic together with UP/DOWN to get the final setting.
If all the numeric terminals are disabled, function code F00.04 is used to set present 0：数字频率给定F00.07 0: Numeric frequency setting 1：AI1*F00.16 F00.07 0 1 2 3 4 5 2：AI2*F00.16 3：AI3*F00.16 4：AI4*F00.16 Auxiliary frequency source gain 辅助 频率源 Auxiliary frequency source B 辅助频率源B选择 F00.05 F00.05 6 5：HDI*F00.16 增益 F00.11 F00.11 10 11 6：SCI*F00.16 Figure 1-3 Auxiliary Frequency Source B Setting 18 1100：: Pr过oce程ss PPIIDD 1111：: Si简mp易le PPLLCC