sinee — 11.6 Upper Mounting Hole

EM500 Open-Loop Vector Control Inverter User Manual To install top cover, only need to tighten up 9 M5*12 screws on both sides and on the back. 安装顶罩将两侧及背部共 9颗M5*12螺钉拧紧即可 To replace base, you only need to remove 15 M6*14 bolts on both sides and on the back 拆掉两侧及背部共15颗 M6*14螺栓即可更换底座 Figure 11-6 Installation of Base and Top Cover of Inverter (450 - 560kW) 11.6 Upper Mounting Hole EM500 large-power inverter (450 - 560kW) can be accompanied with upper mounting hole to make the machine stand against wall with machine back. If required, please inform while ordering and complete installation by yourself. See Figure 11-7 for details. 378