EM500 Open-Loop Vector Control Inverter User Manual Point CANopen expansion card at interface and location hole of expansion slot, and fix them with screws. Figures of real objects are as follows: Elevation Back Elevation 1. POWER Indicator 2. RUN Indicator 3. ERR Indicator 4. READY Indicator 5. CANopen Interface 6. Screw Location Hole 7.
Inverter Interface IV.3 Expansion Terminal Function Table 7 CANopen Expansion Card Terminal Function Table 8 CANopen Expansion Card Indicator 436 Type Item Terminal Description CANopen Communication Terminal 1 CANH Signal Line (Anode) 2 CANL Signal Line (Cathode) 3 PGND Signal Ground Communication Card READY (Green) ERR (Red) RUN (Green) Initialization Status ON OFF OFF Pre-operation Status ON OFF Rapid Flicker Operation Status ON OFF