sinee — Ⅶ.2 Installation Instructions

EM500 Open-Loop Vector Control Inverter User Manual Appendix Ⅶ Clock Expansion Card (EC-TM-A1) Ⅶ .1 General EC-TM-A1 card for EM500 series inverter control terminal expansion, which contains the following resources: 拧紧此处M3*8组合螺钉 Ⅶ .2 Installation Instructions  Please install the IO expansion card in the EC-A expansion slot (note the installation is correct and snap in place).  Please remove IO expansion card in case of inverter power is completely off Figure 6 IO expansion card installation diagram Align the I / O expansion card with the expansion slot interface and positioning holes, with screws. Figures of real objects are as follows:

1 3 2 Elevation Back Elevation 445 Item Specification Description Clock chip Clock chip Provide accurate clock Battery card slot Clock chip backup battery slot Only the CR2032 can be installed