EM500 Open-Loop Vector Control Inverter User Manual Appendix Ⅷ Appendix VII. Phase Sequence Expansion Card (EC-PSP-A1) Ⅷ .1 General EC-PSPP-A1 card for EM500 series inverter control terminal expansion, which contains the following resources: Ⅷ .2 Installation Instructions Please install the IO expansion card in the EC-A expansion slot (note the installation is correct and snap in place). Please remove IO expansion card in case of inverter power is completely off 拧紧此处M3*8组合螺钉 Figure 6 IO expansion card installation diagram Align the I / O expansion card with the expansion slot interface and positioning holes, with screws.
447 Item Specification Description Input 3 analog voltage signal in Support 380V input only, used to detect the phase angle of the grid and put the actual output phase angle of the inverter phase angle difference Output 2-way digital signal outpu Used to control the frequency t converter to the signal output