EM500 Open-Loop Vector Control Inverter User Manual press ESC to enter menu level 1, from which using digital potentiometer to select a menu mode. The operation procedure for menu mode selection is shown in Figure 4–2. Figure 4-2 Operation Procedure of Menu Mode Selection 4.2.1All menu mode (--A--) Press ENTER under the all menu mode to enter the second level menu to select any function code. Press ENTER again to enter the third level menu to review or modify function parameters. Except some special function parameters, those function parameters needed by users can be modified.
Under the all menu mode, the whole operation procedure from power-on and initialization to value change of F03.28 to 5.28 is shown in Figure 4–3. 62 ESC ESC ESC