EM500 Open-Loop Vector Control Inverter User Manual 76 F00.00 Not Used F00.01 Drive Control Mode of Motor 1 0: V/F control (VVF) 1: Sensorless Vector Control (SVC) 0 〇 F00.02 Command Source Options 0: Keypad Control (LOC/REM indicator on) 1: Terminal Control (LOC/REM indicator off) 2: Communication Control (LOC/REM indicator flickers) 0 〇 F00.03 Terminal Control Mode Options 0: Terminal RUN for running, Forward/Reverse (F/R) 1: Terminal RUN for forward, F/R reverse 2: Terminal RUN for forward, Xi stop, F/R reverse 3: Terminal RUN for running, Xi stop Forward/Reverse (F/R) 0 〇 F00.04 Main Frequency Source A Options 0: Numeric Frequency Setting F00.07 1: AI1 2: AI2 3: AI3 4:
AI4 (Expansion Card) 5: High-Frequency Pulse Input (X7) 6: Main Frequency Communication Percentage Setting 7: Main Frequency Communication Direct Setting 8:digital Potentiometer 0 〇 F00.05 Auxiliary Frequency Source B Options 0: Numeric Frequency Setting F00.07 1: AI1 2: AI2 3: AI3 4: AI4 (Expansion Card) 5: High-Frequency Pulse Input (X7) 6: Auxiliary Frequency Communication Setting 7: Auxiliary Frequency Communication Direct Setting 8: digital Potentiometer 9: Not Used 0 〇