EM600 High-Performance Vector Control Inverter User Manual Figure 11-4 Installation Dimensions of Anchor Bolt of Base EM600 large-power inverter (450 - 560kW) can be accompanied with an installation base and top cover with the same width as inverter (refer to Figure 11-6). The overall inverter height can be changed to 2000mm, if base or top cover will be replaced; the overall inverter can be changed to 2200mm, if both base and top cover will be replaced. If required, please inform while ordering and complete installation by yourself. See Figure 11-6 for details.
Figure 11-5 Base and Top Cover of Inverter (450 - 560kW) Base (Optional) 选配底座 选配顶罩 Top cover (Optional) To install top cover, you onl need to tighten up 9 M5*12 screws on both 安装顶罩将两侧及背部共 9颗M5*12螺钉拧紧即可 sides and on the back. To replace base, you only need to remove 15 M6*14 bolts on both sides and on the back 拆掉两侧及背部共15颗 M6*14螺栓即可更换底座 Figure 11-6 Installation of Base and Top Cover of Inverter (450 - 560kW) 249