sinee — I.3 Expansion Terminal Function

EM600 High-Performance Vector Control Inverter User Manual  Figures of real objects are as follows: Elevation Back Elevation 1. DIP Switch 1 2. DIP Switch 2 3. Analog Signal Interface 4. Numeric Signal Interface 5. Screw Location Hole 6. Inverter Interface I.3 Expansion Terminal Function Table 1 IO Expansion Card Terminal Function 276 Terminal Mode Terminal Terminal Function No. Auxiliary Power Supply Provide working power supply for 24V-COM +24V Power Supply numeric input and output terminals Default setting:

connecting to 24V power supply Common When driving numeric input terminal PLC Multi-function Input with external power supply, disconnect Terminal it from 24V terminal and connect it to external power supply. Numeric Input X8 Multi-function Input Terminal 8 Optocoupler isolation, compatible with bipolar input of NPN and PNP Input impedance: 4.5 kΩ Input voltage range: 9 – 30 V See Table 3-17 X9 Multi-function Input Terminal 9 X10 Multi-function Input Terminal 10 X11 Multi-function Input Terminal 11 Multi-Function Output Y3-COM OC Output Terminal Optocoupler isolation, OC output Maximum output voltage: DC48V Output current: 50 mA Analog Input AI4-GND Analog Input Terminal 4 Input range:

DC -10V - +10V; voltage input mode is selected by switch S2 on IO expansion card. Input impedance: Voltage mode 1 MΩ