User Guide of EM730 Series Inverter Flicker bit Flicker bit Flicker bit Flicker bit Flicker bit Flicker bit Flicker bit Flicker bit Flicker bit Flicker bit Flicker bit Flicker bit Flicker bit In all menu modes, the user needs to press the ENTER key Fig. 4-3 Flowchart from Power-on to F03.28=5.28 Setting to save parameter modifications. Differences after parameter saving are as follows: In the full menu mode, enter the function code following the function code that has been successfully modified. In the non-default mode, enter the non-default function code following the non-default function code that has been successfully modified.
In the Level 3 menu, press the ESC key to abandon parameter modifications. 4.2.2 Non-default mode ( -- C -- ) In the non-default mode, press the ENTER key to enter the Level 2 menu. The first parameter different from the default settings of the inverter will be displayed, starting from F00.00. When the right shift key is pressed in the Level 2 menu, the cursor will not shift. 34