User Guide of EM730 Series Inverter 96 torque control 3: retention 4: retention 5: high frequency pulse input (X5) 6: Communication setting (percentage) 7:
Communication setting (direct frequency) F13.09 Positive upper limit of torque control frequency 0.50to maximum frequency F00.16 Hz 50.00 ● F13.10 Upper frequency limit offset 0.00 to maximum frequency F00.16 Hz 0.00 ● F13.11 Static friction torque compensation 0.0-100.0 % 0.0 ● F13.12 Frequency range of static friction compensation 0.00 - 50.00 Hz 1.00 ● F13.13 Dynamic friction torque compensation 0.0-100.0 % 0.0 ● F13.18 Reverse speed limit options 0 - 100 % 100 ● F13.19 Reverse torque control options 0-1 0 ● F14 Parameter group of motor 2 (Detail in EM730 User Manual) F15 Auxiliary function group F15.00 Jog frequency 0.00 to maximum frequency F00.16 Hz 5.00 ● F15.01 Jog acceleration time 0.00 - 650.00 (F15.13=0) 0.0 - 6500.0 (F15.13=1) 0 - 65000 (F15.13=2) s 5.00 ● F15.02 Jog deceleration time 0.00 - 650.00 (F15.13=0) 0.0 - 6500.0 (F15.13=1) 0 - 65000 (F15.13=2) s 5.00 ● F15.03 Acceleration time 2 0.00 - 650.00 (F15.13=0) 0.0 - 6500.0 (F15.13=1) 0 - 65000 (F15.13=2) s 15.00 ● F15.04 Deceleration time 2 0.00 - 650.00 (F15.13=0) 0.0 - 6500.0 (F15.13=1) 0 - 65000 (F15.13=2) s 15.00 ● F15.05 Acceleration time 3 0.00 - 650.00 (F15.13=0) 0.0 - 6500.0 (F15.13=1) s 15.00 ●