User Guide of EM730 Series Inverter 99 mode with set frequency less than lower frequency limit 1: Shutdown 2: zero-speed running F15.34 Fan control 0: running after power-on 1: running at startup 2: intelligent operation, subject to temperature control 1 〇 F15.35 Overmodulatio n intensity 1.00 - 1.10 1.05 ● F15.36 Switching options of PWM modulation mode 0: invalid (7-segment PWM modulation) 1: valid (5-segment PWM modulation) 0 〇 F15.37 Switching frequency of PWM modulation mode 0.00 to maximum frequency F00.16 Hz 15.00 ● F15.38 Options of dead zone compensation mode 0: no compensation 1: compensation mode 1 2: compensation mode 2 1 〇 F15.39 Terminal jog priority 0: Invalid 1:
valid 0 〇 F15.40 Deceleration time for quick stop 0.00 - 650.00 (F15.13=0) 0.0 - 6500.0 (F15.13=1) 0 - 65000 (F15.13=2) s 1.00 ● F15.66 Overcurrent detection level 0.1-300.0 (0.0: no detection; 100.0%: corresponding to the rated current of motor) % 200.0 ● F15.67 Overcurrent detection delay time 0.00-600.00 s 0.00 ● F15.68 Market price 0.00-100.00 1.00 〇 F15.69 Power-frequen cy load factor 30.0-200.0 % 90.0 〇 F16 Customization function group F16.00 Industry application 0: Universal model 1: Water supply application 2: Air compressor application 3: Winding application 4: fan application 0 〇