User Manual of EM730/EM730E Series Inverter If the terminals are unavailable, the current setting channel is determined by the function code F00.04, and final settings are obtained through UP/DOWN setting calculation. 0: digital frequency setting F00.07 1 ： AI1*F00.16 0 1 2 ： AI2*F00.16 2 5 Gain of auxiliary frequency source F00.11 5: HDI*F00.16 Auxiliary frequency source B: F00.05 6: SCI*F00.16 6 7 ： SCI 7 8 10 11 8: digital potentiometer 10: process PID 11: simple PLC Fig. 1-3 Schematic Diagram of Setting of Auxiliary Frequency Source B As shown in Fig.
1-3, the current setting channel is determined directly by the function code F00.05 during the setting of the auxiliary frequency source B, and the process PID and simple PLC can be involved in the setting. 0: main A + auxiliary B 0 1: main A - auxiliary B Gain of main and auxiliary Options of main and auxiliary operation 1 frequency source F00.12 F00.08 2 3 2: max (main A, auxiliary B) 3: min (main A, auxiliary B) Fig. 1-4 Schematic Diagram of Setting of Main and Auxiliary Operations As shown in Fig. 1-4, main and auxiliary operations are divided into four types, in which main and auxiliary settings are valid. Torque setting mode with the motor current as controlled target 16