sinee — EM730 User Manual

User Manual of EM730/EM730E Series Inverter F27.01=0 Feedforward gain * set source B: The feedforward gain acts on the set source B. F27.01=1 Feedforward gain * set source A A : The feedforward gain acts on the set source A. F27.01=2 Feedforward gain *10V : The feedforward gain is directly multiplied by Fmax and then superimposed on the output. F27.02=0 Unchanged feedforward gain: The feedforward gain is always the set value of F27.05. F27.02=1 0.00 to upper limit of feedforward gain: The feedforward gain will be automatically adjusted between 0.00 and F27.04 settings. F27.02=2 - Upper limit of feedforward gain to + upper limit of feedforward gain:

The feedforward gain will be automatically adjusted between -F27.04 and + F27.04 settings. The unmarked settings are the same as those of F27.00=0 by default. 292 Function Function code Default Parameter description Unit Attribute code name setting F27.01 Feedforward gain action channel 0: feedforward gain * set source B 1: Feedforward gain * set source A 2: Feedforward gain * 10V 1 〇 Function Function code Default Parameter description Unit Attribute code name setting F27.02 Feedforward gain input mode 0: No change in feedforward gain 1: 0.00 to upper limit of feedforward gain 2:

- upper limit of feedforward gain to + upper limit of feedforward gain 1 〇 Function Function code Default Parameter description Unit Attribute code name setting F27.03 Feedforward control Ones place: Feedforward reset option 0: automatic resetting 1: terminal resetting Tens place: Feedforward power-off stop option 0: save after power-off 10 〇