User Manual of EM730/EM730E Series Inverter ★ Some parameters of the current series are reserved, and their readings are 0. Some options of parameters are reserved and settable, but this may result in abnormal operation of the inverter. Please avoid misuse of such parameters. The table below provides the details of the function code table. 65 F14 Parameter group of motor 2 P106;P250 F15 Auxiliary function group P113;P253 F16 Customization function group P116;P265 F17 Virtual I/O function group P117;P272 F18 Monitoring parameter group P120;P276 F19 Protection record group P123;P279 F27 Winding/unwinding application macro parameter group Function code F00.00 to F99.99:
function code number Function code name Full name of the function code. “Reserved” means that the corresponding function code is temporarily reserved and has no practical meaning. Brief description of the function code. It is mainly divided into the following three types: The value of the integral function code represents the current parameter selection or meaning. Integral Parameter description The ones, tens, hundreds, thousands and tens of thousands represent one option or the current meaning of the function code. Quantifier Each binary bit represents one option or the current meaning of the function code. Binary Metric units of the function code.
The units and abbreviations are as follows: Hz Hertz kW kilowatt us Microsecond kHz Kilohertz kWh Kilowatt-hour ★ ms Millisecond % Percent★ MWh Megawatt hour s Second Unit V Volt mΩ Milliohm min min A Amp mH Millihenry h h rpm rpm ℃ °C m m ★: %: The benchmarks are different for physical quantities; kWh: Kilowatt hour, commonly known as the degree.