User Manual of EM730/EM730E Series Inverter 79 of terminal start command F04.29 Zero speed check frequency 0.00 - 5.00 Hz 0.25 ● F04.30 Initial magnetic pole search mode of synchronous motor 0: Invalid 1: Mode 1 0 ● F05 V/F control parameter group F05.00 V/F curve setting 0: straight line V/F 1: multi-point broken line V/F 2: 1.3-power V/F 3: 1.7-power V/F 4: square V/F 5: VF complete separation mode (Ud = 0, Uq = K * t = voltage of separation voltage source) 6:
VF semi-separation mode (Ud = 0, Uq = K * t = F/Fe * 2 * voltage of separation voltage source) 0 〇 F05.01 Frequency point F1 of multi-point VF 0.00 - F05.03 Hz 0.50 ● F05.02 Voltage point V1 of multi-point VF 0.0～100.0 (100.0 = Rated voltage) % 1.0 ● F05.03 Frequency point F2 of multi-point VF F05.01～F05.05 Hz 2.00 ● F05.04 Voltage point V2 of multi-point VF 0.0-100.0 % 4.0 ● F05.05 Frequency point F3 of multi-point VF F05.03 to rated frequency of motor (reference frequency) Hz 5.00 ●