User’s Guide for EM760 series high-performance vector inverter ⚫ Please install the inverter on a fire-retardant object (e.g. metal). Never install it on flammable objects (e.g. wood). ⚫ No direct sunlight. ⚫ No flammable or corrosive gas and liquid, dust, oily dust, floating fibers or conductive dust. ⚫ The installation foundation should be secured and vibration-free. Do not pose any obstacle within 1m behind the inverter cabinet, so as to provide some space for maintenance. ⚫ Avoid electromagnetic interference and keep the controller away from interference sources. Preventive measures drilling and other processes from falling into the inverter. Remove the protection after installation.
Take protective measures to the inverter during installation to prevent metal fragments or dust generated in 2.4 Installation Direction and Space effects, the inverter must be installed in a vertical direction, and sufficient spaces must be reserved between the The EM760 inverters are equipped with cooling fans for forced air cooling. To ensure good cyclic cooling inverter and adjacent objects or baffles (walls). Refer to Fig. 2-2 . 大于120mm >120mm Convect 对流口 大于120mm 大于l20mm 2.5 Panel removal and installation Fig. 2-2 Inverter installation direction and space Wiring of the main circuit, control circuit and expansion card for the EM760 Series requires removal of the top cover.
When wiring is completed, install the wiring ducts and top cover in the reverse order of removal. (1) EM760 0R7G/1R5P~022G/030P panel removal 16 大>5于0m5m0 mm 大>5于0m5m0 mm