User’s Guide for EM760 series high-performance vector inverter 0 0 ESC Positioning:F00. 00 3 Positioning:F03. 00 2 Positioning:F03. 00 0 OK + KYP SPD 0.00Hz F03.02:R1 Output Function 0 ： No Output OK F03.03:R2 Output Function F03.04:DO Function Y3 (EC) F03.05:Output Signal Type F03.06:POS/Neg Logic of DO ESC ESC Positioning:F03 .02 02/36 ESC KYP SPD 0.00Hz KYP SPD 0.00Hz OK For details of other modes, see the User's Manual 4.3 Parameter copying For convenient parameter setting between inverters using the same function parameters, the keyboard is provided with parameter uploading and downloading functions.
When function code F12.03 is set to 1 and ENTER is pressed for confirmation, inverter-related parameters will be uploaded to the keyboard; upon uploading, the keyboard shows the progress; when uploading is completed, the value of the function code will automatically change to 0. The keyboard with uploading completed may be inserted into another inverter that needs to use the same parameters. Once the keyboard is inserted, you may change the value of the function code F12.03 to 2 and download the parameters to the inverter. If you set the value of the function code to 3, motor parameters will be downloaded in addition to normal parameters.
Upon downloading, the keyboard will show the progress. Similarly, upon completion of parameter downloading, the value of the function code will automatically change to 0. 32 KYP SPD 0.00Hz F00.00:Not Used 0 F00.01:Control Mode Motor 1 F00.02:Command Source Options F00.03:Terminal Mode Options F00.04:Main Freq Options ESC Positioning:F00.00 00/36 ESC Positioning:F00 . 0 KYP SPD 0.00Hz F03.02:R1 Output Function Cur: 00 0:No Output Scope：0~73 ESC + ESC F03.02:R1 Output Function 10：Lower Limit Freq Reach F03.03:R2 Output Function F03.04:DO Function Y3 (EC) F03.05:Output Signal Type F03.06:POS/Neg Logic of DO ESC Positioning:F03 .02 02/36 ESC F03.02:R1 Output Function Cur:
1 0 10:Lower Limit Freq Reach Scope：0~73 ESC OK ESC