Emco Compact 5 PC — Emco Compact 5 PC CNC Lathe Software Description & User Manual PDF

Edit_ G84 Example 1 Facing cycle without cut distribution G84 _ Face turning cycle GB4i Zz +43 x 620 Input format: 243 D35 Fa Ww imm} Imm] imm] [um] fam/r) [mnvmin} XIU)| Block number Face turning cycle Absoiute (incremental) coordinates of the contour corner point (K) absolute: N../GB4/Z-1/X6/D3 1000/F80 incremental: N.../GB4W-1/U-8/D3 1000/F80 Taper dimension in X (radius value) Taper dimension in Z Cut distribution Example 2 Facing cycle with cut distribution w - a ~ t absolute: incremental: $22 $20 K N.../G84/Z-2/K6/D; 600/100 N.../GB4AV-2/U-8/D; 600/F 100 Cut distribution D3 = 0,6mm (= 600pm) 3x0,6mm _.......0.000.... Rest (= finishing cut) ....... Total advance ..............

Exampie3 Facing cycle overmeasures with 1,8 mm 0.2 mm 2 mm If there is No Pg or Po, it need not be programmed. Difference between longitudinal turning and facing cycle: With the longitudinal turning cycle X(U) is programmed before Z(W) - thus the first movement is carried out in X-direction. With the facing cycle Z(W) is programmed before X(U) - thus the first movement is carried out in Zdirection. As for the rest, longitudinal turning and facing cycie are similar. Longitudinal turning cycle G84-X-Z cut distribution and taper Facing cycle G84-2-X Aj2 absolute: N.. /G84/2-3/K10/Pq -1.33/P, -1.12 /D; 700/F80 incremental: 122 N.. /GB4W-3/U-6/P 9 -1.33/P, -1.12 (D3 700/F80