Emco Compact 5 PC — Emco Compact 5 PC CNC Lathe Software Description & User Manual PDF

Menu points Draw Positioning the cursor incrementally (F1) Unit: Positioning the cursor with X dimension and angle (F4) [mm] The cursor is shifted from the present position by the entered values. Jnit: [mm], [°] Entering the X dimension incrementally Example: X=19mm,A= - 45° Entry Screen message 19,45 [al X, angle mavement from the cursor? Positioning the cursor absolutely (F2) Unit: [mm] The cursor is shifted by the values entered (always measured from the reference point). Positioning the cursor with Z dimension and angle (F5) Unit: {mm],[°} Entering the Z dimension incrementally Example: Z=15mm,A= -35° (clockwise) Entry Screen message Z, angle movement from the cursor?

Positioning the cursor with the radius and 15,-35 [a] angle (F3) : Unit: [mm], [°] The cursor is shifted from the present position by the radius and angle entered. Example: R = 24mm,A = -30° (clockwise) Screen message Entry Determining the step size of the cursor (F6) Radius, angle movement from the cursor? Unit: [mm] The step size is the distance the cursor moves every time a key is pressed. 24, -30 The step size of the cursor is 1 mm when you call ° Pe up the software. p —_ Example: Cursor step should amount to 2.5 mm \ _— | Entry Screen message Note: Angle entry Positive (+) sign = angle in the anti-clockwise direction. Negative (-) sign = angle in the clockwise direction.

Cursor step 1.000 New step (ENTER = no change) 57 2,5