Emco Compact 5 PC — Emco Compact 5 PC CNC Lathe Software Description & User Manual PDF

Menu points Program 4.3 Program (F3) The tool moves to the cursor position with the feed speed set to the time (see F9), when the key F2 is pressed. The machining cycle is determined for a work piece drawn and simulated on the screen in this menu. The tool path is shown graphically. The machining program is compiled automatically. PROGRAM Fl F2 F3 F4 FS F6 F7 F8 F9 F10 RAPID FEED CYCLES EDITOR TOOL CHNGE ERASE LAST ERASE PROG FEED G94/G95 OFFSET Possibilities PROGRAM 4.3.3 CYCLES (F3) 4.3.1 Moving in the rapid (F1) PROGRAM Moving in the rapid is a movement without chip removal and only serves to position the tool. The slides move with the highest possible speed (200 mm/min).

F4 F2 F3 F4 FS F6 F7 F8 FO F10 Representation on the screen: The tool moves to the cursor position in the rapid, when the key F1 ts pressed. we - - - A - ROUGHING BACK POCKET CONTOUR CUT-IN THREAD cycle is a pointed tool movement, enclosed and composed of many parts. A circle is composed of the rapid movements or thread-cut movements. which and. is feed R ee -— 4 ec ro Ve 4.3.2 Moving with feed speed Ve A eT aS (F2) Ve S E Vp Ve The slides move with the programmed feed speed (= machining movement, see F9). Representation on the screen: 74 = = = = Starting point Endpoint Feed speed Rapid speed .