Emco Compact 5 PC — Emco Compact 5 PC CNC Lathe Software Description & User Manual PDF

Menu points Program (Threading cycle) Left-hand thread Acknowledge inputs -3 | end of input (ENTER | —- . = accepted) | You have two possibilities: | | 1 | 1 The thread screen. cycle is worked off on the Exit from the thread cycle. The values entered last are suggested at the next call-up of the thread cycle. Thread pitch Screen message: { atch = 1,000 (ENTER = nochange): Thread-cutting tools offered are designed for pitches of P = 0,5- 2mm or 11-40 turns per inch. You can see the pitches for standardized threads from the table of the chapter “thread dimensions". Notes for working P off the thread cycle at the machine Speed:

Adjust the smallest speed range (BC1 J Indicate nominai and core diameter | Enter nominal diameter element: Place the cursor to the | nominal diameter B and acknowledge with ENTER. The following message appears: | Enter Place core the diameter cursor element: to | the core diameter and acknowledge with ENTER. 88 \ = 200 rpm).