Menu points Program 4.3.4 Edit (F4) By pressing the key F4 you enter the "Edit" program. In Edit you can work in the same way as with the’ original CNC machine and set up NC programs according to standards (acc. to DIN 66025 and ISO 1056). For an exact description see chapter 6 "EDIT". Machining possibilities (Survey) Workpiece data CAD (design on screen) 0 8 EDIT ee | {determine machining with CNC program acc. to DIN 66025 and ISO 1056) CAM (Determine N0000/G67/F3 N0010/G94/F200/T01 N0020/G00/X20/21 raphically and simulate) .
N0030/GB4/X 16.1/2-44.8 /D3 800/F 180 NO040/GO0/K16.1/Z1 N0050/G84/X12.1/Z-24.8 /D3 800/F 180 N0060/G00/x12/Z1 NOO70/GO1/Z-25 NO080/G01/X16 N0090/G01/2-45 NO 100/G01/X20 NO110/G00/K40/Z20 machining process co 1 - - _ | NO120/M30 Ref. 1: a The machining process (CAM) deter- Work off mined graphically can be transformed into NCprograms and changed there {in the editor). Ref. 2: The NC-program entered in the screen is transformed by pressing a key and is simulated automatically on the screen. The machining process determined in the editor can also be changed graphically again and in the following be executed on the lathe. 90 -