US Army Materiel Command AMCP 706-197 — AMCP 706-197 Reliability Prediction Handbook — US Army Engineering Design Guide PDF

Downloaded from https://www.everyspec.com 3At"P 7097 NaI~~y, TABU I Step E& 3kb cost Ww AorazM (I) I ?1 lop Step3 1 0.80 1.2 1.0 5.3 6 2 0.70 2.3 I.0 6.3 3 0.75 3.4 1.0 5.2 5 4 0.85 4.5 1.0 3.8 4 Systm Noty 0.9979 0.977 Systm cot (56 na) 56.0 56. Se Ws. uWgt (30 rax 20.7 21.0 TABU.

2 s N11 Rlbliy Cost Wit AMUloa (xi) I ri cl wi Step I Slop 3 Rliability, Ga ad Woblt Factors for Exmp 2 1 0.90 5 8 2.9 3 2 0.75 4 9 4.2 4 3 0.65 9 6 4.9 4 0.80 7 7 3.7 3 5 0.85 7 8 3.0 3 6 0.93 5 a 2.3 2 7 US7 6 9 3.4 4 8 0.66 9 6 5.0 9 0.78 4 7 4.0 4 10 0.91 S 8 2.7 3 11 0.79 6 9 3.5 3 12 0.77 7 7 3.7 4 13 0.67 9 6 5.1 14 0.79 8 5 4.3 S 15 0.67 6 7 S.A S System reliability 0.952 0.945 System cost (400 nam) 336.0 389.0 'AV System veot (414 max) 413.7 414.0 EXAMPLES For Step 1, it is easiest to use the optimization meth, J of Lans and Jaskola [71 ; see the Appendix for the simple &]Sod. Since there is no assurance that the gobal optimum is thin. Theiial value for each xri = 1,2.....

4 was chosen as reached, it is instructive to test this method by applying it to 2.0, the initial region for the random numbers as 5.0, the re- a ss of reliability problems which have been handled by .'Ion factor for the regions after each iteration was chosen other methods. to be 0.2, and 100 iterations were specified. The algorlthm for step I is given in the Appendix. ExampkI At the end of Step I the results are as shown in Table I. The reliability probem (61 maximizes the reliability func. These values of x, were then truncated and Steps 2 anA 3 were tion performed to yield the results shown in Table I. The answer is better than that obtained by Misra and Sharna (6].

4 aX f/ l {I-(l- rd (3) The total computation time by the 3.step procedure was 3 seconds on IBM 370/165 digital computer, during which the subject to the constraints reliability function was evaluated 5384 times. 1 CX 1 56 (4) Example 2 4 4 I Z wI 30 (5) To provide ; more rigorous test of the proposed procedure, consider a 15 stage reliability problem where the constraints There are 4 stages and the reliability, cost, and weight factors of (4) and (5) are 400 and 414 respectively; the reliability, cost are given in Table i. and weight factors are in Table 2. 12.23