US Army Materiel Command AMCP 706-197 — AMCP 706-197 Reliability Prediction Handbook — US Army Engineering Design Guide PDF

Downloaded from https://www.everyspec.com AMCP 706-197 CHAPTER 13 COMPUTER PROGRAMS 13-1 INTRODUCTION MARSEP has been programmed for compu- ters at the Picatinny Arsenal and the Harry Modern computers are powerful topls that Diamond Laboratories. can be used by the engineer to compute the MARSEP accepts as input a description of reliability characteristics of complex systems, the system and a definition of system success. A variety of mathematical methods have been The computer determines which combina- developed which can be applied to solving tions of component events are required for many different types of reliability problems. system operation and system failure.

Programs are available for computing param- eters such as reliability, availability, and MTF The system description contains a list of for repairable and unrepairable systems. individual system components and their oper- ating and failure modes. A set of two events, Some of the programs can handle very success and failure, must be defined for each large systems of hundreds of elementary units component. Failure of any individual compo- for which failure and repair information must nent does not cause failure in any other com- be pro-4ded. Other programs permit cost- ponent.

effective systems to be designed by comput- ing optimum allocations of redundant units A simple circuit consisting of a battery, which obey constraints on weight, size, cost, switch, relay, light, and squib is shown in Fig. and other factors. Simulation techniques have 13-1. The circuit description includes all ter- been developed for systems that are too corm- minals and wires, including the ground termi- plex to be evaluated by other methods. nal. In using MARSEP, it is assumed that pos- A large number of computer programs sible failure in connections and wire leads are have been developed for predicting the relia- important and must be considered. bility parameters of systems.

These programs A model must be prepared from the cir- have been written by many companies for a cuit diagram. The MARSEP model is a block number of governmental agencies. Some of diagram whose elements represent the individ- the programs were developed for a specific ual system components, their possible failure system, and some are more general and can be modes, and operating conditions. Some of the applied to many system configurations. symbols used to prepare a MARSEP model are shown in Table 13-1. The MARSEP model 13-2 MATHEMATICA'S AUTOMATED RE- for the sample circuit is shown in Fig. 13-2.

LIABILITY AND SAFETY EVALUA- MARSEP provides a modeling language TION PROGRAM (MARSEP) that is used to describe the elements in the MARSEP model and their interconnections. MATHEMATICA, Inc., developed a pro- Each element in the MARSEP model must be gram that automates the evaluation of the re- given a name for use in the system description liability and unreliability of electromechanical part of the input data. For example, in Fig. systems (Ref. 1). MATHEMATICA'S AUTO- 13.2, the battery is defined as BATTRY, and MATED RELIABILITY AND SAFETY the short mode of failure is called SHORT.

EVALUATION PROGRAM (MARSEP), was A set of symbols is also required, each originally developed for the SANDIA Corpor- symbol representing the probability of occur- ation for use in evaluating nuclear weapon rence of the usual (most likely) event(s) for systems. It can be used for both reliability each element in the MARSEP model. The pre- and unreliability calculations. The unreliabili- fix P is used to identify events which corre- ty calculations are used in system safety anal- spond to a component functioning successful- yses where unreliability terms of very small ly, or transmitting a signal, or both. The pre- magnitude may be very important.

fix Q identifies events associated with a com- MARSEP provides a means of computing ponent failing to function, or opening the cir- an exhaustive Boolean expression that in- cuit, or both. Both types of symbols are cludes all possible success and failure events, referred to as P Names. Table 13-2 shows the 13-1 j.-_'. . : -