Downloaded from https://www.everyspec.com AMCP 706-17 j second expression is for system success when the up-state rules; replacement and repair the switch is closed by the hand. strategies; and support constraints for the system. The support constraints are the num- 13-3 GENERAL EFFECTIVENESS METH- ber of repairmen and their specific assign.
ODOLOGY (GEM) ment, the number of spares pools, the spares in each pool and identification of the items The GEM system was developed by the that share each pool, allocation strategies to Naval Applied Sciences Laboratory in order be used in cases of conflicting demands on to provide engineers with a user oriented relia- repairmen and/or spares, and identification of bility evaluation technique (Refs. 2-5). The items to be held in standby. The user also user interacts with GEM by means of a Ian- specifies which reliability parameters are to be guage especially developed for use in reliabili- calculated by the GEM processor. ty problems.
The system description is written in the The GEM system consists of the GEM lan- GEM System Definition Language, and the guage, a System Library, a Formula Library, parameters to be calculated are stated in the and a program system containing a processor GEM Command Language (Ref. 4). The Com- and update programs. mand Language also is used to make modifica- The GEM processor is designed to accept tions to previously defined system descrip- descriptions of reliability block diagrams to- tions. gether with associated data and to calculate The System Library is a magnetic tape one or more reliability ineasures.
The descrip- containing system descriptions, calculation re- tion and computed results can be stored in quests, and calculated results for previously the System Library which can later be retriev- evaluated systems (Ref. 5). The Formula Li- ed, modified, and re-evaluated. brary is a magnetic tape containing the formu- The Formula Library contains a set of las and computer routines for calculating the mathematical subroutines for computing vari- reliability parameters that are part of the ous reliability parameters, relieving the engi- GEM system (Ref. 5). neer of the burden of constructing a new pro- The GEM processor refers to the System gram for each new system evaluation.
Library (if the system has been previously The GEM program system was developed evaluated) and the Formtla Library, while it using a modular approach that facilitates the first translates the system description and cal- modification of existing programs and addi- culation requests into a mathematical modPl tion of new routines as needed. The general for computing the parameters requested, then organization of the GEM program system is performs the calculations, and finally, prints shown in Fig. 13-3. tile results.
GEM can be used to support systems de- Error-checking routines are built into the velopment, trade-off analyses, evaluation, and processor to detect omissions, inconsistencies optimization. The processor is structured to in the description or data, wrong parameters, evaluate variables such as reliability with or impossible values of parameters, and other er- without repair, instantaneous availability, and rors. When errors are detected, the processor interval reliability for systems that include prints error messages that define the nature of such hardware interdependencies as bridge the errors and their location.
networks, shared elements, standby equip- The GEM system also contains a set of ment, and environmental strategies and priori- Library Update Programs for generating, ties including repairmen and spare parts pools maintaining, and updating the System Library (see Fig. 13-4). and the Formula Library. 13-3.1 STRUCTURE OF GEM The GEM system provides a printed out- put in the form of a tabulation of computed The engineer using GEM provides a sys- results or a plot output. The user's original tern description consisting of a reliability system description is presented as part of the model; failure, repair, and replacement rates; output. 13-9