Downloaded from https://www.everyspec.com AMCP 706"197 There are three phases to GEM. During Environmental Vectors serve two basic Phase 1, information is read (transferred) into functions. They enable the user to describe the computer, error checked, and stored in complex configuration or upstate rules which files within the computer in a compact form. cannot be stated in terms of series-parallel Phase 2 processing involves making the modi- statements. They also enable one to specify fications indicated by the original modifica- constraints with respect to repairmen and/or tion commands.
In Phase 3, the newly created spares as well as their deployment and the system is used to generate a FORTRAN ordei of priority to be followed when there source program, to permit the calculation of are not enough repairmen and/or spares for the systems effectiveness measures. The FOR- every item that is in a downstate. TRAN program is compiled and executed, the answer tables are created, and, subsequently, 13-3.3.2 Illustration of the System Definition the output (a printout of the evaluated sys- Language tems and error messages and a print file tape) is generated.
The concept used in describing a system configuration in GEM permits the connectivi- 13-3.3 THE GEM LANGUAGE ty of the items in a block diagiam to be de- fined in stages (levels of comprehensiveness) 13-3.3.1 The System Definition Language so that more detail is stated at each level until the lowest level item is reached. In effect, the Some of the basic elements (vocabulary) block diagram consists of a hierarchy of levels of the System Definition Language are (Ref. and, at each level, the appropriate relationship 4): of the items just one level below is defined. 1. Level Number To illustrate this procedure, consider the 2. Duplicate Number block diagram in Fig. 13-6. -- " 4.
Formula Name subsystems connected in series. The first sub- . 5. Parameters system consists of four identical items and the 6. Environmental Vectors (E Vectors). upstate rule is that at least two must be up The Level of an item is its level of con- (2-out-of-4:G). The second subsystem is a par- prehensiveness or its position in a hierarchy allel-series configuration. The breakup of a 3. Item Name The system in Fig. 13-6 is made up of two that represents the manner in which the user system in terms of its levels can be portrayed views the system. by a GEM diagram. For the example in Fig. 13-6 this would have the form shown in Fig. ThJ Duplicate number of an item states 13-7.
The description of this system in the the number of identical items in a system and GEM Definition Language would be as in Ta- is used to avoid having to describe identical ble 13-5. items more thin once. In Table 13-5, the entry in the Formula ?ilie item Name is used for identification column designates that at the 01 level, the and is arbitrarily chosen by the user. Names rule of combination for the two 02 level items same level if they are not identical. these items are connected in series (SER). It is not necessary to state the mathematical for- S The Formula Name is either a statement mula for a series connection, only its code. At !
of the relationship that items in a lower level ohnthe first 02 level, the Formula entry is PAR to bear to one another, or it identifies the name designate that the four 03 level items are con- of a failure and/or repair distribution associ- nected in parallel. The entry in the Parameter ated with a lowest level item. column, M = 2, states that at least two of the need not be unique except for items of the (SBSYS1 and SBSYS2) is the statement that The Parameters ser:e as either further 03 items must be up in order for the 02 item clarification of the relationship stated in the to be up. The entry of 4 in the Dup.
column formula or they give the parameters of the for item A states that there are four identical failure and/or repair distributions associated items, each called A, and the FENO entry in with the .,wast level items. the Formula column states that the times to 13-15