Downloaded from https://www.everyspec.com AMCP 706-197 achevever hih eli~liytheimprtace independence ought alastobeith an of cmmo-mod falurs ofen s ovrloked alys's indwhen he uses redundancy. In sstes whch se edunanc to completely. The key nature of condiionls TABLE 2-4. COMMON MODE (CAUSE) FAILURE CALCULATIONS ProcdureExample 1.. Calculate the Pr{AF} I. Pr AF}- '. tP AFIEi} PrtEd (2-32) Adopt - N9 (6 x 10-4) X 0.9976 + 0 X 10-2) X (2 X 10") P {A}= {AIB,}AP'{8i} 12-23b~) +(I x10") x(4 x10-) 6.59 x10-4 2. CalculteAr{BF} 2. Pr OFI=Pr {AF}J= 6.59 X 10' because AF and BF are interchangeable in the probabilities as given.
The unconditional probabilities differ from the benign conditional ones by less than 10 %. (in practice rarely is a low probability of failure known as accurately as within t 10%.) 3. Calculste the conditional probabilities of AFflDF. Adapt 3. N {(AF(iOF(IEO}-(6 X 10- -) 0.00036 X 10' Eq. 2.28. N {AvFlB8F)IEd-. Pr {AFIE lPr {BFIE,1 Pr{j(AFfl8F)IEHT I (1 )( 10-2), = 0.1 x 10- fori B.8,HT, ET. Pr {(APnBO)EET} I X 10 1)2 = lo x 10O1 4. CalcultPr{AFrlBF}. 4. Pr {AFr~ac} (0.00036 X 10- 3 )XO0.9976 + (0.1 X 10-') Adapt Eq. 2-23b. X 12X 10 3 ) + (OX 10- 3 )X 14 X 10')-0.36 X 10' + 0.200 X 10' + 4 X 10' - 4.56 X 10-' 5. Calculate Pr (AF} )N {BF} 5.
Pr {AF1Pr {PF}I- (6.59 X 10) = -4.34 x IV- From step 4 it is seen that virturtly the only "cat so" of system failure is the common-mode Electrical Transient Environment. Fiom step bit is oeen that if (unconditionall s-rndepe 'dance were to have been assumed, the failure probability of the system would have been underestimated by a factor of 10. 2-9