US Army Materiel Command AMCP 706-197 — AMCP 706-197 Reliability Prediction Handbook — US Army Engineering Design Guide PDF

Downloaded from https://www.everyspec.com AMCP 703-197 1 6-2.2.1 Discrete ystems cal, electromechanical, and electronic com- ponents and subsystems. Because of the way a A discrete sy'ttem has precisely defined tank is structured, a simple functional block mechanical and electrical boundaries, and it diagram which places the functions in a sim- occupies a limited, well-defined volume. Ex- pie geometrical order with a signal flow from amples of such systems are rifles, artillery input to output cannot be drawn. The sys- projectiles, tanks, and helicopters. A function- tem-level block diagram of a main battle tank ai and mechanical description of a discrete is shown in Fig. 6-3 (Ref. 7).

system usually can be prepared in a straight- forward manner. The reliability block dia- 6-2.2.2 Dispersed Systems grams usually are derivable readily from the descriptions. In a dispersed system the components are A traditional radio receiver is an example dispersed over an area and often fit together of a simple discrete system; see Fig. 6-1 (Ref. in a complicated way that requires multiplex- 5). The cystem-level functional block diagram ing of signal paths and feedback.

It may be describes the functional elements of the sys- difficult to describe such a system with a tern and defines the signal flow and irtercon- single set of functional block diagrams; a nections between the functional elements. All more complex representation might be re- functio tal blocks are numbered and are keyed quired. to the blocks of the reliability model. A tropospheric-scatter system is a good A more complex discrete system is the example of a dispersed system (Ref. 8). infrared (IR) camera in Fig. 6-2 (Ref. 6). This Tropospheric-scatter transmission systems are system contains mechanical, optical, and elec- used to extend line of sight communication trical subsystems.

These subsystems can be systems by using atmospheric refraction to completely described by functional block dia- transmit !, igh-frequency waves beyond the grams of different levels of complexity. For horizon. Direct transmission between two ter- example, the mirrors can be described by a minal stations located beyond the optical single level block diagram, while the IR detec- horizon is obtained by the scattering proper. tor may require several levels of functional ties of the troposphere. Since the transmission block diagrams and detailed circuit schematics properties of the atmosphere randomly fluc- for a complete description.

tuate, many properties of a tropospheric- A tank is an example of an even more scatter system are statistical. This complicates complex discrete system; it contains mechani- the functional description of the system be- ANTENNA TUNE FIXED AUDIOSPAE T R MIXER FREQUENCY DETECTOR MPLIFIERPEAKER AMPLIFIERI L MPLIFIE Cy A - OSCI LLATOR Copyrighted by McGraw-Hill Book Co., Inc.. 1956. Reprint- ed from Radio Electronics with permission. FIGURE 6-1. Radio Receiver Functional Block Diagram s 6-3