US Army Materiel Command AMCP 706-197 — AMCP 706-197 Reliability Prediction Handbook — US Army Engineering Design Guide PDF

Downloaded from https://www.everyspec.com -MC 70S-197 formatting rules is required to show unambig- 3. Outputs to external equipment uously the logical relations between system 4. Terminal events such as outputs from functions. (This entire subparagraph is adapt- recorder, PPI scope, or headphone set. ed from Refs. 2 and 4.) To be useful, the If the events are to be observed, such as at formatting rules should be uniform, i.e., the test points, the point of observation is indi- same set of symbols and rules must be usable cated in the event entry column. If events are at all levels of system disclosure, to be measured, the points of measurement ae indicated.

Specifications or descriptions The basic symbolic elements of the de- for the event are referenced by a number lo- pendency diagram are described: cated in a box at the base of the column head- A or V The triangle indicates the existence of ing. The physical location of each functional a dependency on another event. The element and event is identified at the top of apex of the triangle points toward the each column. The combinatorial rules govern- event which is depended upon. ing groups of events and functional elements 0 The circle placed on a dependency can be summarized in the headings.

line (in a particular column) indicates A set of standard interpreting rules for the existence of functional element logical, mechanical, electrical, and topological represented by that column. interrelationships between functional ele- O The square represents an event or ments and events in a system must be used in multiplicity of events (action or avail- the dependency diagram. The distinction be- able output) which results from the tween topological, electrical, logical, and proper operation of a specific group mechanical considerations is crucial in the for- of functional elements and the avail- matting of complex systems. ability of specific events.

Topological relationships depict the physi- By use of these basic symbols, a de- cal interconnections between functional ele- pendency diagram can be developed. The de- ments. Electrical interrelationships indicate pendency diagram symbolically illustrates the functional signal processing interactions be- interdependencies between the functional tween elements. Logical dependencies irdi- elements and events in the system. The de- cate the Boolean relationships among func- pendency diagram mapc the functional inter- tional elements. Mechanical dependencies in- actions of a system iro a dependency struc- dicate mechanical interactions between ele- ture. ments in a mechanical system.

In addition to the basic symbols, the de- The three basic symbols (triangle, circle, pendency diagram also makes use of: square) are combined in various ways to form 1. Event entries (headings) the dependency structure. The resultant event 2. Functional element entries (headings) and the functional elements and dependencies 3. Data rows upon which it depends are connected by 4. Notes and signal specifications means of the horizontal dependency lines. 5. Procedure column. There are nine standard rules for inter- All of these contain information which is use- preting he structure of the dependency chart ful for the generation of reliability models. for reliability model derivation, i.e., 1.

1; a circle (functional element) The column headings list the name and appears in a specific column several times, it location of all events and functional elements represents only one physical entity. associated with the dependency diagram. 2. Only AND dependencies can b Each event and functional element is identi- depicted on a single dependency line. fied by means of an alphameric code. 3. Output events dependent upon a specific functional element are placed to the The event entries can indicate: fight of the symbol representing that clemept. 1. Inputs from external equipment Input events to that element appear to the 2. Important internal events left of the element. 6-8