Downloaded from https://www.everyspec.com AMCP 706-197 ___a complex process which involves the struc- CONTACTS ture of the system, up-state rules, the param- et.-r to be computed, the computation I me :iod, and the repair and spares strategies. As a result of these interacti,ns, the reliability COIL model is not a fixed entity, even for a specific system. Specifically, a reliability model con- sists of some or all of the following: 1. Reliability block diagram(s) 2. Definition of the up-state rules 3. Failure and repair rates of all func- tional elements 4. Definition of repair strategies 5. Definition of spares allocation and strategies.
The manner in which a reliability model TERMINALS can be structured is discussel in detail in the paragraphs that follow. F IG U R E 6 -14 . F un c tio n al D iav w n o f a R elay ' p o e d n w i haNe ai e d s Before proceeding with a detailed dis- mathematical defifitions of reliability with- out repair, reliability with repair, instanta- distanc fo rce th ecrmeagnti ilanda- neous availability, steady state availability, distance force, the electromagnetic field, and and mean time to failure (MTF) must be de- the mechanical action of the contacts. The veloped.
These definitions are presented along dependency structure readily can be used to with several other useful definitions, as adapt- represent mechanical and action-at-a-distance ed from Ref. 2. forces and can, therefore, be used to describe a wide variety of systems. cussion of the derivation of reliability models, Reducer (Mechani- 1. Reliability Without Repair. The C. A Packaged Speed Reduc an example s-reliability without repair at time t is defined fcamechanical system (Ref.10). Packaged as the probability that the system will not fail wreduction gear trains ill perform satisfactorily) before time t, as- that are assembled at the factory.
Their use as suining that all components are good at t = 0 funits results in considerable (the beginning of the m~ission). The s-reli- savings of time and money. The output, in ability vs time curve has a value of 1 at t = 0 * this case, is a rotation of the output shaft.. and monotonicaly decreases for increasing The output speed of rotation is related in an values of t. exact way to the speed of rotation of the in- 2. Reliabi!ity With Repair. Thes-reli- put shaft by the gear arrangement. A pack- ability with repair of a system is defined as aged speed reducer is shown in Fig. 6-16 and the probability that th, system will not fail its dependency diagram in Fig. 6-17.
before time t, given thaL all components are good at t = 0, but v ith the provision that 63 DEVELOPMENT OF RELIABILITY redundant items wni'zh fail are repaired.. For a MODELS 1-unit system or a system made up of units in srios, thf- s.rliability with repair is the same 6-3.1 INTRODUCTION as reliability withoWi repair, since the failure of cne unit is considered as a system failure The development of a rehability model is arid, by definition of s-reliabiiity, the system 6-20