Downloaded from https://www.everyspec.com AMCP 706-.20 yC R, 0.473 .. 0.49 In ,._ -__ __ F. Figure 7-23 Ejector Loading Diagrarn F o = 14.5 lb, minimum spring force To find the time of c.-se ejection, apply Eq. 2-27 and then assume that ti'.: .. pring is 90% effective Fm - 24.0, naxiinrn spring force F. / .46x _I 0 14.5 0.794 in, radius of &,ration of case ' " 0.9 gx " 24 about its CG A K = 68 lb/in., spring constant - 2.005 - iO -3 Cos - ' 0.604 = 0.002905 (2. 7. 57.3I T = 1.1 in., distance from lipping point on = 0.00184 sec.
rim to CG of case Wee a 0.0293 lb, weight of case The velocity of the ejector at this time is found from the expressbns for kinetic eneigy and the work dona by the We/ -= 0.0492 lb, weight of ejector spring by resorting to the appropriate portions of Eq. 2-24 and solving foi the velocity. W = 0.0039 lb, weight of spring di___+._5x3 x1 = (FoF )A /0i.9 x 38.5 x 0.14 Ay - 0.14 in, spring deflection during ve= M = 2.46x 10 - ejector operation 140 in./sec From Eq. 7-49, During this time, with the extractor as the center of rotation, the case has traveled through the angle 0 (Fig. I(I~ kiw2w + '7- 23). The last point of contact between base of cas g 3 S + + r CC and ejector is shiwn at A.
The, tange Ial velocity at this point, since the case is still rotating, is the component of 1 0.0013 + 0.0492 V. that is perpendicular to the turning radius r. 386.4 0.63+121. P .= cosO = 140 x0,959 - 134.3 in./sec + 1.21 0.0293 * 2.46 x 10 4 lb.sec 2 /in. whre 0 = Tar 0.14 _ Tan' 0.296 - 16030 '. 0.473 7--29