AMCP 706-260 — Engineering Design Handbook: Guns Series — Automatic Weapons

Downloaded from https://www.everyspec.com AMCP 706.260 BOLT LOCK --\ BOLT--\, RECOIL 7 BOLT FULLY RECOILED UNLOCKING TRAVEL Figure 2-6. Locking System for Delayed Blowback The stiffness of the springs should not be so great as size of the masses in motion, the dynamics at any given to interfere unduly with early recoil. Therefore, a system time are determined by the summations of computed consisting of three springs is customarily used: (1) a values for all preceding increments of time.

The impulse barrel spring having an initial load slightly larger than the during each increment Is recoiling weight to insure almost free recoil and still have the capacity to hold the barrel in battery, (2) a buffer FAt =ALAI (2-45) spring to stop the recoiling parts and return them, and (3) a bolt driving spring to control bolt activity. Before where A b n bore area the bolt is inlocked, all moving parts recoil as one man with only the barrel spring resisting recoil but this spring A, = area under At of pressure-time curve force is negligible compared to the propellant gas force and may be neglected during recoil.

After the bolt At - time increment becomes unlocked, the barrel spring combines with the buffer spring to arrest the recoiling barrel unit. When the impulse is being determined during low pres- sure periods due consideration should be given to the The unlocked bolt continues to be accelerated to the resistance offered by the driving spring. F At should be rear by the impetus of the decaying propellant gas pres- adjusted after the driving spring and gas pressure forces sure whose only resistance now is the force of the driv- become relatively significant.

During each increment, the Ing spring, a negligible resistance until the propellant gas differential velocity is pressure becomes almost zero. Thereafter, the spring stops the bolt and later closes it. Normally the barrel p unit has completed counterrecoil long before the bolt A, -. s (2-46) has fully recoiled to provide the time and relative dis. M, tance needed for extracting, ejecting, and loading. After w the barrel unit is in battery, the bolt unit functions as a where M r mass of the recoiling parts influenced by single spring unit.

FAt" 2-4.2 DYNAMICS OF DELAYED BLOW3ACK The velocity of recoil at the end of each increment becomes While the complete unit is recoiling freely and later while all springs ate operating effectively, the dynanics V =v( - I )+ AV (2-47) of the system are readily computed by an iteratve process. Given the pressure-time curve, by knowing the where Y(' , = velocity at the preceding increment 2-18