AMCP 706-260 — Engineering Design Handbook: Guns Series — Automatic Weapons

Downloaded from https://www.everyspec.com AMCP 706-260 3-7 SAMPLE PROBLEM - ACCELERATOR 3-3) is so designed that at final contact with the bolt. the bolt has moved 0.56 in., and the barrel. 0.28 in. The radii to the two contact points at this time, are 3-7.1 SPECIFICATIONS: Identical to long recoil problem (see par. 3-3.1) 0.90 in. when Ar b , 5'. rr 0.25 in. whn Aut a, 0.28 in. 3-7.2 DESIGN DATA: R3 Rc- 3.6 t L = l0 in., minimum bolt travel distance At the end of the propellant gas period. when t 6 Wb - 10lb, weight of bclt unit msec, the barrel has recoiled xr , -1.14 in. and has a velocity of free recoil Pfov, 234.1 In/sec.

A W'- 50 lb, weight of barrel unit preliminary analysis, conducted by the same procedure that follows showed that the transfer of monsentumn to e - 0.5, efficiency of spring system the bolt caused the barr ' to reverse its direction of motion. Also, appropriate spring constants were Table 3--3 has the numerical integration for a rczoiling selected. weight of 60 lb. The buffer or barrel spring and driving K a 20 lb/in., d~iving spring constant springs resist recoil from the start but are measureably effective only after 1/2 iv'h of recoil. The buffer sp, ing is not comprcssed on installaeion. The accelerator (Fig. K, - 200 lb/in., barrel spring constant TABLE3-3.

RECOIL TRAVEL OF 20 mm GUN EQUIPPED WITH ACCELERATOR t, ,t, Al, FAt, P, va , Ax. msec msec lb-sec/in. lb-sec in./sec in./sec in./scc in.

0.25 0.2f 3.44 1.77 11.4 11.4 5.7 0.0014 0.50 0.25 10.15 5.24 33.7 45.1 28.2 0.0071 u.75 0.25 11.89 6.13 39.5 84.6 64.8 0.0162 1.00 0.25 11.12 5.74 37.0 121.6 103.1 0.0258 1.25 0.25 9.25 4.76 30.6 152.0 131.9 0.0330 1.50 0.25 7.10 3.76 24.2 176.4 159.3 0.0398 2.00 0.25 3.71 1.91 12.6 206.3 200.0 0.0500 1.75 0.25 5.23 2.69 17.3 193.7 185.0 0.0462 2.25 0.25 2.58 1.34 8.6 214.9 210.6 0.0526 2.50 0.25 1.82 0.94 6.1 221.0 218.0 0.0545 2.75 0.25 1.39 0.72 4.6 225.6 223.3 0.0558 3.00 0.25 1.06 0.55 3.5 229.1 227.4 0.0569 3.263 0.263 1.00 0.52* 3.3 232.4 230.8 0.0607 4.00 0.737 1.34 0.40* 2.6 235.0 233.7 0.1711 5.00 1.00 1.04 0.12$ 0.8 235.8 235.4 0.2354 6.00 1.00 0.40 -0.27* -1.7 234.1 235.0 0.2350 *Reduced b, iesistance of springs x, = YAx 1.14 in.

3-17